Ramesh Raghavendra

Ahmed Obeidi, M., Uí Mhurchadha, S. M., Raghavendra, R., Conway, A., Souto, C., Tormey, D., Ahad, I. U. & Brabazon, D., 01 Jul 2021, In: Journal of Materials Research and Technology. 13, p. 2361-2374 14 p.

Research output: Contribution to journal › Article › peer-review

Open Access

31 Citations (Scopus)

Development and validation of empirical models to predict metal additively manufactured part density and surface roughness from powder characteristics

Quinn, P., Uí Mhurchadha, S. M., Lawlor, J. & Raghavendra, R., 2021.

Research output: Contribution to conference › Paper › peer-review

Effect of Voronoi Lattice Geometry on the Fatigue Performance of Ti-6Al-4V

Uí Mhurchadha, S. M., Marques, S., Givet, L. & Raghavendra, R., 2021.

Research output: Contribution to conference › Paper › peer-review

Microstructural and mechanical evaluation of post-processed SS 316L manufactured by laser-based powder bed fusion

Sohrabpoor, H., Salarvand, V., Lupoi, R., Chu, Q., Li, W., Aldwell, B., Stanley, W., O'Halloran, S., Raghavendra, R., Choi, C. H. & Brabazon, D., 2021, In: Journal of Materials Research and Technology. 12, p. 210-220 11 p.

Research output: Contribution to journal › Article › peer-review

Open Access

18 Citations (Scopus)

2020

316l stainless steel powders for additive manufacturing: Relationships of powder rheology, size, size distribution to part properties

Groarke, R., Danilenkoff, C., Karam, S., McCarthy, E., Michel, B., Mussatto, A., Sloane, J., Neill, A. O., Raghavendra, R. & Brabazon, D., Dec 2020, In: Materials. 13, 23, p. 1-19 19 p., 5537.

Research output: Contribution to journal › Article › peer-review

Open Access

11 Citations (Scopus)

A new method for assessing the recyclability of powders within Powder Bed Fusion process

Gorji, N. E., Saxena, P., Corfield, M., Clare, A., Rueff, J. P., Bogan, J., González, P. G. M., Snelgrove, M., Hughes, G., O'Connor, R., Raghavendra, R. & Brabazon, D., Mar 2020, In: Materials Characterization. 161, 110167.

Research output: Contribution to journal › Article › peer-review

45 Citations (Scopus)

A pre-formulation strategy for the liposome encapsulation of new thioctic acid conjugates for enhanced chemical stability and use as an efficient drug carrier for MPO-mediated atherosclerotic CVD treatment

Jayaraj, P., Shavi, G. V., Srinivasan, A. K., Raghavendra, R., Sivaramakrishna, A. & Desikan, R., 21 Feb 2020, In: New Journal of Chemistry. 44, 7, p. 2755-2767 13 p.

Research output: Contribution to journal › Article › peer-review

6 Citations (Scopus)

Experimental and computational characterization of the effect of manufacturing-induced defects on high temperature, low-cycle fatigue for MarBN

O'Hara, E. M., Phelan, B., Osgerby, S., Barrett, R. A., Raghavendra, R., Leen, S. B. & Harrison, N. M., Aug 2020, In: Materialia. 12, 100683.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Experimental and empirical model analysis of microsurface texturing on 316 L press-fit joints fabricated by selective laser melting

Sohrabpoor, H., Mousavian, R. T., O’Halloran, S., Benyounis, K. Y., Baraheni, M., Obeidi, M. A., Ahad, I. U., Raghavendra, R. & Brabazon, D., 01 Jun 2020, In: International Journal of Advanced Manufacturing Technology. 108, 9-10, p. 2687-2699 13 p.

Research output: Contribution to journal › Article › peer-review

10 Citations (Scopus)

Powder Rejuvenation Process Investigation for the Improved Utilisation of Powder in Additive Manufacturing

Quinn, P., O'Halloran, S., Lawlor, J. & Raghavendra, R., 2020, Proceedings - Euro PM2020 Congress and Exhibition. European Powder Metallurgy Association (EPMA), (Proceedings - Euro PM2020 Congress and Exhibition).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Single-step process of microstructural functionally graded Ti6Al4V by laser powder bed fusion additive manufacturing

Geng, Y., Phelan, B., Raghavendra, R. & Harrison, N., 01 Aug 2020, In: Welding in the World. 64, 8, p. 1357-1366 10 p.

Research output: Contribution to journal › Article › peer-review

2019

Development of a standalone in-situ monitoring system for defect detection in the direct metal laser sintering process.

Quinn, P., O'Halloran, S., Ryan, C., Pamell, A., Lawlor, J. & Raghavendra, R., 2019, p. 1390-1399. 10 p.

Research output: Contribution to conference › Paper › peer-review

1 Citation (Scopus)

Evaluation of the metal additive manufacturing process through the study of the recyclability of metal powder and in-situ metrology

Quinn, P., O'Halloran, S. M., Lawlor, J. & Raghavendra, R., 2019.

Research output: Contribution to conference › Paper › peer-review

Plastic anisotropy of additively manufactured maraging steel: Influence of the build orientation and heat treatments

Mooney, B., Kourousis, K. I. & Raghavendra, R., Jan 2019, In: Additive Manufacturing. 25, p. 19-31 13 p.

Research output: Contribution to journal › Article › peer-review

96 Citations (Scopus)

Process phenomena influencing the tensile and anisotropic characteristics of additively manufactured maraging steel

Mooney, B., Kourousis, K. I., Raghavendra, R. & Agius, D., 04 Feb 2019, In: Materials Science and Engineering A. 745, p. 115-125 11 p.

Research output: Contribution to journal › Article › peer-review

47 Citations (Scopus)

The effect of metal EOS 316L stainless steel additive manufacturing powder recycling on part characteristics and powder reusability

Quinn, P., O’Halloran, S., Lawlor, J. & Raghavendra, R., 03 Apr 2019, In: Advances in Materials and Processing Technologies. 5, 2, p. 348-359 12 p.

Research output: Contribution to journal › Article › peer-review

26 Citations (Scopus)

2018

3D Metal printed heat sinks with longitudinally varying lattice structure sizes using direct metal laser sintering

Shamvedi, D., McCarthy, O. J., O’Donoghue, E., Danilenkoff, C., O’Leary, P. & Raghavendra, R., 02 Oct 2018, In: Virtual and Physical Prototyping. 13, 4, p. 301-310 10 p.

Research output: Contribution to journal › Article › peer-review

42 Citations (Scopus)

An investigation into the reverse transformation mechanisms in the heat treatment of austenitic stainless steel

O’Sullivan, D., Raghavendra, R., Cotterell, M., Mészáros, I. & Tanner, D. A., 14 Jun 2018, In: Materials Performance and Characterization. 7, 4

Research output: Contribution to journal › Article › peer-review

Characterisation of Recycled Powders and Resulting Component Properties Derived from Additive Manufacturing

Quinn, P., O'Halloran, S. M., Lawlor, J. & Raghavendra, R., 2018.

Research output: Contribution to conference › Paper › peer-review

Improving the Strength-to-Weight Ratio of 3-D Printed Antennas: Metal Versus Polymer

Shamvedi, D., McCarthy, O. J., Odonoghue, E., Oleary, P. & Raghavendra, R., Nov 2018, In: IEEE Antennas and Wireless Propagation Letters. 17, 11, p. 2065-2069 5 p., 8466886.

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Improving the strength to weight ratio of 3D Printed Antennas: Metal Vs Polymer

Raghavendra, R., 17 Sep 2018, In: IEEE Antennas and Wireless Propagation Letters .

Research output: Contribution to journal › Article › peer-review

Investigation of the influence of build orientation on the surface roughness of the 3D metal printed horn antenna

Shamvedi, D., Danilenkoff, C., O'Leary, P. & Raghavendra, R., 2018, IET Conference Publications. CP741 ed. Institution of Engineering and Technology, (IET Conference Publications; vol. 2018, no. CP741).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Process Phenomena influencing the tensile and anisotrpic characteristics of additively manufactured maraging steel

Raghavendra, R., 15 Dec 2018, In: Materials Science & Engineering A.

Research output: Contribution to journal › Article › peer-review

Progress in 3D metal printed microwave components - An overview

Shamvedi, D., McCarthy, O. J., O'Donoghue, E., O'Leary, P. & Raghavendra, R., 2018, IET Conference Publications. CP741 ed. Institution of Engineering and Technology, (IET Conference Publications; vol. 2018, no. CP741).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

2017

3D metal printed monocone antenna with an integrated feed

Shamvedi, D., McCarthy, O. J., Donoghue, E. O., Leary, P. O. & Raghavendra, R., 19 Dec 2017, European Microwave Week 2017: "A Prime Year for a Prime Event", EuMW 2017 - Conference Proceedings; 47th European Microwave Conference, EuMC 2017. Institute of Electrical and Electronics Engineers Inc., p. 168-171 4 p. (European Microwave Week 2017: "A Prime Year for a Prime Event", EuMW 2017 - Conference Proceedings; 47th European Microwave Conference, EuMC 2017; vol. 2017-January).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Citations (Scopus)

3D metal printed sierpinski gasket antenna

Shamvedi, D., McCarthy, O. J., O'Donoghue, E., O'Leary, P. & Raghavendra, R., 11 Oct 2017, Proceedings of the 2017 19th International Conference on Electromagnetics in Advanced Applications, ICEAA 2017. Institute of Electrical and Electronics Engineers Inc., p. 633-636 4 p. 8065326. (Proceedings of the 2017 19th International Conference on Electromagnetics in Advanced Applications, ICEAA 2017).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

10 Citations (Scopus)

3D Printed Periodic Structure in a Horn Antenna for Side-lobe Reduction using Direct metal Laser Sintering

Raghavendra, R., 2017, 3D Printed Periodic Structures in a Horn Antenna for Side-lobe Reduction using Direct Metal Laser Sintering.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3D printed periodic structures in a horn antenna for side-lobe reduction using direct metal laser sintering

Shamvedi, D., Danilenkoff, C., Karam, S., O’Leary, P. & Raghavendra, R., 2017, IET Conference Publications. CP732 ed. Institution of Engineering and Technology, (IET Conference Publications; vol. 2017, no. CP732).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

5 Citations (Scopus)

A novel long-acting biodegradable depot formulation of anastrozole for breast cancer therapy

Shavi, G. V., Nayak, U. Y., Reddy, M. S., Ginjupalli, K., Deshpande, P. B., Averineni, R. K., Udupa, N., Sadhu, S. S., Danilenkoff, C. & Raghavendra, R., 01 Jun 2017, In: Materials Science and Engineering C. 75, p. 535-544 10 p.

Research output: Contribution to journal › Article › peer-review

14 Citations (Scopus)

Improved performance of 3D metal printed antenna through gradual reduction in surface roughness

Shamvedi, D., McCarthy, O. J., O'Donoghue, E., O'Leary, P. & Raghavendra, R., 11 Oct 2017, Proceedings of the 2017 19th International Conference on Electromagnetics in Advanced Applications, ICEAA 2017. Institute of Electrical and Electronics Engineers Inc., p. 669-672 4 p. 8065335. (Proceedings of the 2017 19th International Conference on Electromagnetics in Advanced Applications, ICEAA 2017).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

11 Citations (Scopus)

Surface Treatment of 3D Metal Printed Microwave Components

Raghavendra, R., Mar 2017, Surface Treatment of 3D Metal Printed Microwave Components.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2016

PEGylated liposomes of anastrozole for long-term treatment of breast cancer: In vitro and in vivo evaluation

Shavi, G. V., Reddy, M. S., Raghavendra, R., Nayak, U. Y., Kumar, A. R., Deshpande, P. B., Udupa, N., Behl, G., Dave, V. & Kushwaha, K., 02 Jan 2016, In: Journal of Liposome Research. 26, 1, p. 28-46 19 p.

Research output: Contribution to journal › Article › peer-review

27 Citations (Scopus)

Real Time Monitoring of the CNC Process in a Production Environment- the Data Collection & Analysis Phase

Downey, J., O'Sullivan, D., Nejmen, M., Bombinski, S., O'Leary, P., Raghavendra, R. & Jemielniak, K., 2016, Procedia CIRP. Elsevier, Vol. 41. p. 920-926 7 p. (Procedia CIRP).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Open Access

34 Citations (Scopus)

2015

Nanomedicine of anastrozole for breast cancer: Physicochemical evaluation, in vitro cytotoxicity on BT-549 and MCF-7 cell lines and preclinical study on rat model

Shavi, G. V., Nayak, U. Y., Maliyakkal, N., Deshpande, P. B., Raghavendra, R., Kumar, A. R., Reddya, M. S., Udupa, N. & Shrawan, B., 15 Nov 2015, In: Life Sciences. 141, p. 143-155 13 p., 14508.

Research output: Contribution to journal › Article › peer-review