Fabrication of a GMA-co-EDMA monolith in a 2.0 mm i.d. polypropylene housing

Marcello Iacono, Damian Connolly, Andreas Heise

Research output: Contribution to journalArticlepeer-review

12 Citations (Scopus)


Polymers are interesting housing materials for the fabrication of inexpensive monolithic chromatography and solid phase extraction (SPE) devices. Challenges arise when polymeric monoliths are formed in non-conical, cylindrical tubes of larger diameter due to potential monolith detachment from the housing wall resulting in loss of separation performance and mechanical stability. Here, a two-step protocol is applied to ensure formation of robust homogeneous methacrylate monolith in polypropylene (PP) tubing with a diameter of 2.0 mm. Detailed Fourier-transform infrared (FTIR) spectroscopic analysis and Scanning Electron Microscopy (SEM) imaging confirm the successful pre-modification of the tubing wall with an anchoring layer of cross-linked ethylene dimethacrylate (EDMA). Subsequent formation of an EDMA-glycidyl methacrylate (GMA) monolith in the PP tube resulted in a homogeneous monolithic polymer with enhanced mechanical stability as compared to non-anchored monoliths.

Original languageEnglish
Article number263
Issue number4
Publication statusPublished - 2016


  • Monolith anchoring
  • Polymer monoliths
  • Polypropylene housing


Dive into the research topics of 'Fabrication of a GMA-co-EDMA monolith in a 2.0 mm i.d. polypropylene housing'. Together they form a unique fingerprint.

Cite this